SMWcamera.lua

An API for implementing camera functionality resembling that of Super Mario World. Download the latest version (v1.3.2) here.

Features include:

• Leeway of free movement when changing direction - allows fine-tuning of player position
• Platform-snapping camera
• U/D/L/R camera panning
• Autoscrolling
• Camera locking (keeps camera within a player-defined "room")

Installation & Use

Place the SMWcamera.lua file into the LuaScriptsLib folder. To use, insert at the top of your lunadll.lua file:

local SMWcam = loadAPI("SMWcamera");

Note: if you do not plan on using the autoscrolling or camera lock functionalities, it is not necessary to store the variable.

loadAPI("SMWcamera");

Passive Functionality

Camera Motion

When changing direction, the player is permitted a leeway before the camera refocuses on them; the leeway provided has a default width of 133.3 pixels (1/6 of the camera width).

Whilst on the ground, the API features a platform-snapping camera that will focus on the last platform the player was touching. Camera focus will also be triggered when standing or bouncing on NPCs and spikes (as Link/Sheath).

When climbing/swimming/flying/falling, etc. the camera will freely track the player until they are grounded.

UDLR Panning

After the up/down key for several seconds, the camera will pan in the corresponding direction, allowing you to check for hazards above or below outside of the camera's range.

By holding the Tanooki button and double-tapping the left or right arrow keys, the camera will pan horizontally. This is analogous to the function of the L and R buttons in SMW.

Autoscrolling

The following external functions are used to initiate and stop an autoscrolling camera. During autoscroll, the player is confined to the camera's boundaries, and will die if they dip lower than three blocks below the screen.

BeginAutoScroll(scrollspeedX, scrollspeedY)	scrollspeedX	scrollspeedY
Initiates an autoscroll.	number Horizontal scroll speed	number Vertical scroll speed
StopAutoScroll()
Halts the currently running autoscroll.

If the player warps offscreen during an autoscroll, and the autoscroll is not halted when they exit, the camera will extrapolate using the specified speeds to be as close as possible to the player's position. If the player is still offscreen, the camera will instead be centered on them.

Example

---

local SMWCam = loadAPI("SMWcamera")
local t = 0   -- Frame timer

function onTickEnd()
	-- Pans the camera to the right, wobbles the camera up and down (like on an airship)
	SMWCam.BeginAutoScroll(2, math.cos(t*math.pi/180))

	-- Increment frame timer
	t = t + 1
end

Camera Locking

Example

---

local SMWcam = loadAPI("SMWcamera");

IMPORTANT: It is recommended that functions related to camera locking and autoscrolling be placed in the onTickEnd() event, particularly if the player is expected to warp in or out of a locked boundary. This is due to the hierarchy of when the logic for SMBX is computed. The effect of not doing so is, at the very least, a single frame discrepancy where the camera will snap to the wrong position. If you're creative you can break everything (please don't).

Other Documentation

Below is the documentation for miscellaneous functions.

activate()
Activates SMW camera logic. Logic is active by default.	n/a
deactivate()
Deactivates SMW camera logic.	n/a
isActive()
Checks if SMW camera logic is activated.	boolean
isLocked()
Checks if the camera is locked within a player-defined boundary.	boolean
isAutoScrolling()
Checks if the camera is currently autoscrolling.	boolean