Functions (TeaScript)

FXCreate

This function is used to create an effect.

call FXCreate(ID, X, Y, Xsp, Ysp, Frames, AnimationSpeed, Const, Gravity, Advanced)

Parameters	Description
ID	The effect-ID of the effect to create.
X	The X-scene coordinate where the effect will be created.
Y	The Y-scene coordinate where the effect will be created.
Xsp	The X-speed of the effect.
Ysp	The Y-speed of the effect.
Frames	The number of frames the effect should last.
AnimationSpeed	The number of frames each animation frame will last.
Const	UNKNOWN, default 0
Gravity	Should the effect be affected by Gravity? 0: Yes 1: No
Advanced	UNKNOWN, default 0

LMove

This function is used to move layers.

call LMove(LayerName, Xsp, Ysp, Type)

Parameters	Description
LayerName	The name of the layer that you want to move.
Xsp	The X-distance the layer should move.
Ysp	The Y-distance the layer should move.
Type	The type of movement that the layer should use. 0: Use speed movement. (The layer will move with the given direction) 1: Use shift movement. (The layer will warp with the given direction)

LSet

This function is used to change the visibility of a layer

call LSet(LayerName, Type, Smoke)

Parameters	Description
LayerName	The name of the layer that you want to move.
Type	The type of layer visibility. 1: Show 2: Hide 3: Toggle 38: Alpha Value
Smoke	Should there be smoke? 0: Yes 1: No If the type is set to 38, then this value will set the alpha value of the layer. This value must be between 0-255.

LSpin

This function is used to rotate layers. This function only affect NPCs and Blocks.

call LSpin(LayerName, Xcenter, Ycenter, Speed)

Parameters	Description
LayerName	The name of the layer that you want to move.
Xcenter	The X-scene coordinate of the center of the circle.
Ycenter	The Y-scene coordinate of the center of the circle.
Speed	The angular speed [INSERT BETTER DESC.]

PlayNote

This function is used to play a note.

call PlayNote(Command)

Parameters	Description
Command	The command can be: To play a note Volume*65536 + Flip*256 + 192 + Channel To stop a note Volume*65536 + Flip*256 +128 + Channel To change the instrument Patch*256 + 192 + Channel Patch = ID of the instrument (0-127) Volume = The volume of the note (0-100) Flip = The pitch of the note (0-255) Channel = The channel of the note (0-15) Default:0

ShowMsg

This function shows a message using a message box.

call ShowMsg(Message)

Parameters	Description
Message	The message that will be shown. It must be a string.

Sleep

This function is used to pause the script for a nuber of frames. It can only be used in scripts called through an event.

call sleep(Delay)

Parameters	Description
Delay	The number of frames the script should be paused.

TClear

call TClear(Type, EventName)

Parameters	Description
Type	The clear type 0: To clear a specific timer. 1: To clear all timers.
EventName	If type is 0, then set the EventName to clear. If type is 1, then set this to 0.

TCreate

This function is used to call an eventcreate an event timer.

call TCreate(EventName, Delay)

Parameters	Description
EventName	The event that should be called.
Delay	The number of frames until the event is called.